TH386 Gehäusekupplung weiblich 3 polig
Properties
Other variants (4)
| Name | Item no. | Housing | Polzahl | Steckverbindertyp | Stock | |
|---|---|---|---|---|---|---|
 |
TH386 Gehäusesteckverbinder männlich 3 polig
Panel plug connector, male contacts
Stecker
3
|
THP.386.A1A | Panel plug connector, male contacts | 3 | Stecker | 0 |
 |
TH386 Gehäusesteckverbinder männlich 2 polig
Panel plug connector, male contacts
Stecker
2
|
THP.386.A2A | Panel plug connector, male contacts | 2 | Stecker | 0 |
 |
TH386 Gehäusekupplung weiblich 3 polig
Panel socket connector, female contacts
Buchse
3
|
THP.386.R1A | Panel socket connector, female contacts | 3 | Buchse | 0 |
 |
TH386 Gehäusekupplung weiblich 2 polig
Panel socket connector, female contacts
Buchse
2
|
THP.386.R2A | Panel socket connector, female contacts | 2 | Buchse | 0 |
Matching counterpart
TH384 cable socket connector, male contacts, 3 poles
THB.384.A1APanel half and cable half of the same connection, matching pole count — the termination method of each side can be chosen freely.
TH384 cable socket connector, male contacts, 3 poles
THF.384.A1APanel half and cable half of the same connection, matching pole count — the termination method of each side can be chosen freely.
TH384 cable socket connector, male contacts, 3 poles
THP.384.A1APanel half and cable half of the same connection, matching pole count — the termination method of each side can be chosen freely.
Description
The TH386 series is the panel half for the TH384 cable connection. The connector sits in the enclosure wall, its mating part goes on the cable. The connection is rated 16 A at 400 V AC with an impulse withstand voltage of 4 kV, protection rating IP67.
Mounting
Maximum panel thickness is 5.00 mm — more than on the TH385. Mated, the connection measures Ø 27.0 × 72.0 mm. The mating interface itself is the same as on the TH385.
Which half goes where?
The panel plug with male contacts mates with the TH384 cable socket, the panel socket with female contacts with the TH384 cable plug — at matching pole counts. The termination method of the two halves combines freely: a piercing-terminated panel half can be mated with a screw or crimp cable half.
Pole counts and termination
2 and 3-pole versions are available. Conductors are terminated with a piercing screw: the screw pierces the conductor insulation, so stripping is not required. Conductor cross-section runs from 0.5 to 2.5 mm².
Materials
The plastic parts are black, the sealing elements Techno green, the contacts brass.
The same panel half is also available with screw termination and as a set of both halves. We assemble other configurations to order. Get in touch.