TH386 screw termination
- Series no.:
- TH386-Screw
- Variants:
- 5
- Series:
- TH386(3 versions)
TH386 panel-mount connector with screw termination: panel half for the TH384 cable connector, 16 A at 400 V, 2, 3 and 5 poles, panel thickness up to 5.00 mm, IP67.
Common properties
Available options
These properties vary within the TH386 screw termination series and can be configured.
Example configurations
A selection of typical configurations from the TH386 screw termination series. All 5 variants are listed in the table below.
- Housing:
- Panel plug connector, male contacts
- Steckverbindertyp:
- Stecker
- Polzahl:
- 3
- Housing:
- Panel plug connector, male contacts
- Steckverbindertyp:
- Stecker
- Polzahl:
- 2
- Housing:
- Panel socket connector, female contacts
- Steckverbindertyp:
- Buchse
- Polzahl:
- 5
All variants in the series (5)
| Name | |
|---|---|
| TH386 Gehäusesteckverbinder männlich 3 polig Panel plug connector, male contacts Stecker 3 |
| TH386 Gehäusesteckverbinder männlich 2 polig Panel plug connector, male contacts Stecker 2 |
 | TH386 Gehäusekupplung weiblich 3 polig Panel socket connector, female contacts Buchse 3 |
 | TH386 Gehäusekupplung weiblich 2 polig Panel socket connector, female contacts Buchse 2 |
| TH386 Gehäusekupplung weiblich 5 polig Panel socket connector, female contacts Buchse 5 |
Description
The TH386 series is the panel half for the TH384 cable connection. The connector sits in the enclosure wall, its mating part goes on the cable. The connection is rated 16 A at 400 V AC with an impulse withstand voltage of 4 kV, protection rating IP67.
Mounting
Maximum panel thickness is 5.00 mm — more than on the TH385. Mated, the connection measures Ø 27.0 × 72.0 mm. The mating interface itself is the same as on the TH385.
Which half goes where?
The panel plug with male contacts mates with the TH384 cable socket, the panel socket with female contacts with the TH384 cable plug — at matching pole counts. The termination method of the two halves combines freely.
Pole counts and termination
2, 3 and 5-pole versions are available. The 5-pole version comes as a panel socket only. Conductors clamp with M3 screws at 0.8 Nm; cross-section runs from 0.5 to 2.5 mm².
Materials
The plastic parts are black, the sealing elements Techno green, the contacts brass.
The same panel half is also available with piercing termination and as a set of both halves. We assemble other configurations to order. Get in touch.