TH384 crimp termination, reversed contacts
- Series no.:
- TH384-Crimp-Reverse
- Variants:
- 4
- Series:
- TH384(6 versions)
TH384 with crimp contacts and reversed contacts: cable plug with pins, cable socket with sockets, 10 A at 500 V, 2 and 3 poles, IP66 and IP68.
Common properties
Available options
These properties vary within the TH384 crimp termination, reversed contacts series and can be configured.
Example configurations
A selection of typical configurations from the TH384 crimp termination, reversed contacts series. All 4 variants are listed in the table below.
All variants in the series (4)
| Name | |
|---|---|
 | TH384 Kabelstecker männlich 3 polig Cable plug connector, male contacts Stecker 3 |
 | TH384 Kabelstecker männlich 2 polig Cable plug connector, male contacts Stecker 2 |
 | TH384 Kabelkupplung weiblich 3 polig Cable socket connector, female contacts Buchse 3 |
 | TH384 Kabelkupplung weiblich 2 polig Cable socket connector, female contacts Buchse 2 |
Description
The TH384 series joins two leads to each other — both halves sit on the cable, there is no panel mounting. This version terminates with crimp contacts, ordered separately and applied with the matching tool. The series is rated 10 A at 500 V AC.
Reversed contacts
This version is the mirror image: the pin contacts sit in the cable plug (Ø 27 × 63 mm), the socket contacts in the cable socket (Ø 26.5 × 55 mm). Which side stays live in operation decides the choice — the touchable pins belong on the side that is dead once disconnected.
Pole counts
In this arrangement, crimp termination is available in 2 and 3-pole versions. Cable diameter runs from 7 to 12 mm.
Protection and materials
Protection rating is IP66 and IP68, impact resistance IK07. The housing is glass-fibre reinforced plastic, the contacts brass.
We supply the matching crimp contacts and tooling. Get in touch.