TH385 M20 90° Gehäusekupplung weiblich 3 polig
Properties
Other variants (4)
| Name | Item no. | Housing | Polzahl | Steckverbindertyp | Stock | |
|---|---|---|---|---|---|---|
![]() |
TH385 M20 90° Gehäusesteckverbinder männlich 2 polig
Panel plug connector, male contacts
Stecker
2
|
THP.385.A2F | Panel plug connector, male contacts | 2 | Stecker | 0 |
![]() |
TH385 M20 90° Gehäusesteckverbinder männlich 3 polig
Panel plug connector, male contacts
Stecker
3
|
THP.385.A3F | Panel plug connector, male contacts | 3 | Stecker | 0 |
![]() |
TH385 M20 90° Gehäusekupplung weiblich 2 polig
Panel socket connector, female contacts
Buchse
2
|
THP.385.R2F | Panel socket connector, female contacts | 2 | Buchse | 0 |
![]() |
TH385 M20 90° Gehäusekupplung weiblich 3 polig
Panel socket connector, female contacts
Buchse
3
|
THP.385.R3F | Panel socket connector, female contacts | 3 | Buchse | 0 |
Matching counterpart

TH384 cable socket connector, male contacts, 3 poles
THB.384.A1APanel half and cable half of the same connection, matching pole count — the termination method of each side can be chosen freely.

TH384 cable socket connector, male contacts, 3 poles
THF.384.A1APanel half and cable half of the same connection, matching pole count — the termination method of each side can be chosen freely.

TH384 cable socket connector, male contacts, 3 poles
THP.384.A1APanel half and cable half of the same connection, matching pole count — the termination method of each side can be chosen freely.
Description
The TH385 series is the panel half for the TH384 cable connection. This version takes the cable away at 90° — useful wherever there is no room behind the panel for a straight outlet.
Mounting
It mounts with an M20 thread and the fixing nut supplied; maximum panel thickness is 4.00 mm. The connection is rated 16 A at 400 V AC, impulse withstand voltage 4 kV, protection rating IP68.
Which half goes where?
The panel plug with male contacts mates with the TH384 cable socket, the panel socket with female contacts with the TH384 cable plug — at matching pole counts. The termination method of the two halves combines freely.
Pole counts and termination
2 and 3-pole versions are available. Conductors are terminated with a piercing screw: the screw pierces the conductor insulation, so stripping is not required. Conductor cross-section runs from 0.5 to 2.5 mm².
Materials
The plastic parts are black, the sealing elements Techno green, the contacts brass.
The same connector is available with a straight outlet and with screw and crimp termination. We assemble other configurations to order. Get in touch.



