TH384 Kabelkupplung männlich 5 polig
Properties
Other variants (4)
| Name | Item no. | Housing | Kabelquerschnitt max. mm² | Kabelquerschnitt min. mm² | Polzahl | Stock | |
|---|---|---|---|---|---|---|---|
|
TH384 Kabelkupplung männlich 3 polig
Cable socket connector, male contacts
Stecker
3
|
THB.384.A1A | Cable socket connector, male contacts | – | – | 3 | 0 | |
|
TH384 Kabelkupplung männlich 5 polig
Cable socket connector, male contacts
Stecker
5
|
THB.384.A5A | Cable socket connector, male contacts | 1.5 | 0.25 | 5 | 0 | |
|
TH384 Kabelstecker weiblich 3 polig
Cable plug connector, female contacts
Buchse
3
|
THB.384.B1A | Cable plug connector, female contacts | – | – | 3 | 0 | |
|
TH384 Kabelstecker weiblich 5 polig
Cable plug connector, female contacts
Buchse
5
|
THB.384.B5A | Cable plug connector, female contacts | 1.5 | 0.25 | 5 | 0 |
Description
The TH384 series joins two leads to each other — both halves sit on the cable, there is no panel mounting. Conductors are secured with hex socket screws (M2, 0.2 Nm). The series is rated 10 A at 500 V AC with an impulse withstand voltage of 4 kV.
Which half goes where?
This version combines the cable socket with pin contacts (Ø 26.5 × 55 mm) and the cable plug with socket contacts (Ø 27 × 63 mm). When unmated, the pins therefore sit in the coupling half.
Where the opposite is needed — socket contacts in the coupling, pins in the plug — Techno offers the same connection with reversed contacts. Which side stays live in operation determines which of the two versions is the right one.
Pole counts
With screw termination, 3 and 5-pole versions are available. Conductor cross-section runs from 0.25 to 2.5 mm², cable diameter from 7 to 12 mm.
Protection and materials
Protection rating is IP66 and IP68, impact resistance IK07. The housing is glass-fibre reinforced plastic, the contacts brass. Contact marking 1-2-3-4-5.
Other termination methods in the same series are available as crimp and piercing versions. We assemble other configurations to order. Get in touch.