TH406 UP Industrial
- Series no.:
- TH406-UP
- Variants:
- 6
- Series:
- TH406(5 versions)
TH406 UP Industrial for M28 panel mounting: panel plug and panel socket for cross-sections up to 6 mm², 17.5 A at 400 V, 2 to 5 poles, IP68.
Common properties
Available options
These properties vary within the TH406 UP Industrial series and can be configured.
Example configurations
A selection of typical configurations from the TH406 UP Industrial series. All 6 variants are listed in the table below.
- Housing:
- Panel plug connector, male contacts
- Steckverbindertyp:
- Stecker
- Polzahl:
- 2
- Housing:
- Panel plug connector, male contacts
- Steckverbindertyp:
- Stecker
- Polzahl:
- 3
- Housing:
- Panel plug connector, male contacts
- Steckverbindertyp:
- Stecker
- Polzahl:
- 5
All variants in the series (6)
| Name | |
|---|---|
| TH406 UP Gehäusesteckverbinder männlich 2 polig Panel plug connector, male contacts Stecker 2 |
| TH406 UP Gehäusesteckverbinder männlich 3 polig Panel plug connector, male contacts Stecker 3 |
| TH406 UP Gehäusesteckverbinder männlich 5 polig Panel plug connector, male contacts Stecker 5 |
 | TH406 UP Gehäusekupplung weiblich 2 polig Panel socket connector, female contacts Buchse 2 |
 | TH406 UP Gehäusekupplung weiblich 3 polig Panel socket connector, female contacts Buchse 3 |
 | TH406 UP Gehäusekupplung weiblich 5 polig Panel socket connector, female contacts Buchse 5 |
Description
The UP version of the TH406 panel-mount series is the Industrial variant: same M28 mounting and same mating face as the standard series, but rated for larger conductor cross-sections.
What the UP version is for
On cross-section, the 2-pole version goes to 6 mm² and the 3-pole to 4 mm². That is the difference that matters when more current has to pass through the enclosure wall at the same voltage, or when the cable is sized up for length.
Panel mounting with M28
It mounts from the front with an M28 thread and lock nut. The mating face stays outside, the termination side sits inside the enclosure.
Mating part
It mates with the UP cable versions of the TH405 series for cables from 10 to 16.5 mm — same bayonet locking, same contact arrangements, at matching pole count.
Pole counts
2, 3 and 5-pole versions are available. The protective earth counts as a pole.
The standard version is available as TH406 screw, crimp and piercing termination. We assemble other configurations to order. Get in touch.