TH406 crimp termination
- Series no.:
- TH406-Crimp
- Variants:
- 4
- Series:
- TH406(5 versions)
TH406 TeePlug for panel mounting with M28 thread, for crimp contacts: panel plug connector, 17.5 A at 400 V, 2 to 6 poles, IP68.
Common properties
Available options
These properties vary within the TH406 crimp termination series and can be configured.
Example configurations
A selection of typical configurations from the TH406 crimp termination series. All 4 variants are listed in the table below.
All variants in the series (4)
| Name | |
|---|---|
 | TH406 Gehäusesteckverbinder männlich 5 polig Panel plug connector, male contacts Stecker 5 |
 | TH406 Gehäusesteckverbinder männlich 3 polig Panel plug connector, male contacts Stecker 3 |
 | TH406 Gehäusesteckverbinder männlich 6 polig Panel plug connector, male contacts Stecker 6 |
 | TH406 Gehäusesteckverbinder männlich 2 polig Panel plug connector, male contacts Stecker 2 |
Description
The TH406 series is the panel-mount version of the TeePlug: it takes the same connection as the TH405 through an enclosure wall. It is rated 17.5 A at 400 V AC at protection rating IP68.
Version for crimp contacts
This version ships without any clamping mechanism in the housing — conductors are crimped onto contacts which are then inserted into the insert. In series panel building that is the faster route, because crimping is repeatable by machine. Contacts are ordered separately.
Panel mounting with M28
It mounts from the front with an M28 thread and lock nut. The mating face stays outside, the termination side sits inside the enclosure.
Mating part
It mates with the cable versions of the TH405 series — same bayonet locking, same contact arrangements. The panel plug takes the cable socket at matching pole count.
Pole counts and contact marking
2, 3, 5 and 6-pole versions are available. The protective earth counts as a pole: 2-pole is L-N, 3-pole L-N-E, 5-pole 1-2-L-N-E and 6-pole 1-2-3-L-N-E.
The panel socket is not offered with this termination — Techno lists it with screw and piercing termination. We are happy to supply your cables ready-crimped. Get in touch.