TH385 M20 90° crimp termination

- Series no.:
- TH385-Crimp-M20-90
- Variants:
- 4
- Series:
- TH385(10 versions)
TH385 panel-mount connector, M20 with 90° outlet and crimp contacts: panel half for the TH384 cable connector, 16 A at 400 V, 2 and 3 poles, IP68.
Common properties
Available options
These properties vary within the TH385 M20 90° crimp termination series and can be configured.
Example configurations
A selection of typical configurations from the TH385 M20 90° crimp termination series. All 4 variants are listed below.
All variants in the series (4)
Description
The TH385 series is the panel half for the TH384 cable connection. This version takes the cable away at 90° — useful wherever there is no room behind the panel for a straight outlet.
Mounting
It mounts with an M20 thread and the fixing nut supplied; maximum panel thickness is 4.00 mm. The connection is rated 16 A at 400 V AC, impulse withstand voltage 4 kV, protection rating IP68.
Which half goes where?
The panel plug with male contacts mates with the TH384 cable socket, the panel socket with female contacts with the TH384 cable plug — at matching pole counts. The termination method of the two halves combines freely.
Pole counts and termination
2 and 3-pole versions are available. The contacts are crimped; conductor cross-section runs from 0.5 to 2.5 mm².
Materials
The plastic parts are black, the sealing elements Techno green, the contacts brass.
The same connector is available with a straight outlet and with screw and piercing termination. We assemble other configurations to order. Get in touch.

