TH384 Kabelkupplung weiblich 3 polig
Properties
Other variants (6)
| Name | Item no. | Housing | Kabelquerschnitt max. mm² | Kabelquerschnitt min. mm² | Polzahl | Stock | |
|---|---|---|---|---|---|---|---|
![]() |
TH384 Kabelstecker männlich 3 polig
Cable plug connector, male contacts
Stecker
3
|
THB.384.P1A | Cable plug connector, male contacts | – | – | 3 | 0 |
![]() |
TH384 Kabelstecker männlich 2 polig
Cable plug connector, male contacts
Stecker
2
|
THB.384.P2A | Cable plug connector, male contacts | – | – | 2 | 0 |
![]() |
TH384 Kabelstecker männlich 5 polig
Cable plug connector, male contacts
Stecker
5
|
THB.384.P5A | Cable plug connector, male contacts | 1.5 | 0.25 | 5 | 0 |
![]() |
TH384 Kabelkupplung weiblich 3 polig
Cable socket connector, female contacts
Buchse
3
|
THB.384.R1A | Cable socket connector, female contacts | – | – | 3 | 0 |
![]() |
TH384 Kabelkupplung weiblich 2 polig
Cable socket connector, female contacts
Buchse
2
|
THB.384.R2A | Cable socket connector, female contacts | – | – | 2 | 0 |
![]() |
TH384 Kabelkupplung weiblich 5 polig
Cable socket connector, female contacts
Buchse
5
|
THB.384.R5A | Cable socket connector, female contacts | 1.5 | 0.25 | 5 | 0 |
Matching counterpart

TH384 cable plug connector, male contacts, 3 poles
THB.384.P1AMatching pole count and contact arrangement — the termination method of each half can be chosen freely.

TH384 cable plug connector, male contacts, 3 poles
THF.384.P1AMatching pole count and contact arrangement — the termination method of each half can be chosen freely.

TH384 cable plug connector, male contacts, 3 poles
THP.384.P1AMatching pole count and contact arrangement — the termination method of each half can be chosen freely.
Description
The TH384 series joins two leads to each other — both halves sit on the cable, there is no panel mounting. Conductors are secured with hex socket screws (M2, 0.2 Nm). The series is rated 10 A at 500 V AC with an impulse withstand voltage of 4 kV.
Reversed contacts
This version is the mirror image: the pin contacts sit in the cable plug (Ø 27 × 63 mm), the socket contacts in the cable socket (Ø 26.5 × 55 mm). When unmated, the sockets therefore sit in the coupling half.
Which side stays live in operation decides the choice. The rule of thumb: the touchable pins belong on the side that is dead once disconnected. Techno offers the other arrangement as the standard version.
Pole counts
With screw termination, 2, 3 and 5-pole versions are available. Conductor cross-section runs from 0.25 to 2.5 mm², cable diameter from 7 to 12 mm.
Protection and materials
Protection rating is IP66 and IP68, impact resistance IK07. The housing is glass-fibre reinforced plastic, the contacts brass. Contact marking 1-2-3-4-5.
Other termination methods in the same series are available as crimp and piercing versions. We assemble other configurations to order. Get in touch.




