Engelking

    TH384 crimp termination, reversed contacts

    Series · 4 variants
    Image similar
    TH384 crimp termination, reversed contacts
    Series no.:
    TH384-Crimp-Reverse
    Variants:
    4

    TH384 with crimp contacts and reversed contacts: cable plug with pins, cable socket with sockets, 10 A at 500 V, 2 and 3 poles, IP66 and IP68.

    Common properties

    Connection type:Crimp contacts
    Housing shape:Round
    Housing material:Black plastic
    Kabeldurchmesser [mm] max.:12
    Kabeldurchmesser [mm] min.:7
    Kontaktmaterial:Brass
    MaxStrom [A]:10
    Montageart:Kabelmontage
    Schutzart:IP66
    Serie:TH384
    Spannung [V]:500
    Zulassung:CE

    Available options

    These properties vary within the TH384 crimp termination, reversed contacts series and can be configured.

    Housing:Cable socket connector, female contacts, Cable plug connector, male contacts
    Polzahl:2, 3
    Steckverbindertyp:Buchse, Stecker

    Example configurations

    A selection of typical configurations from the TH384 crimp termination, reversed contacts series. All 4 variants are listed in the table below.

    All variants in the series (4)

    Name Item no. Housing Polzahl Steckverbindertyp Stock
    TH384 Kabelstecker männlich 3 polig TH384 Kabelstecker männlich 3 polig
    Cable plug connector, male contacts
    Stecker
    3
    THF.384.P1A Cable plug connector, male contacts 3 Stecker 0
    TH384 Kabelstecker männlich 2 polig TH384 Kabelstecker männlich 2 polig
    Cable plug connector, male contacts
    Stecker
    2
    THF.384.P2A Cable plug connector, male contacts 2 Stecker 0
    TH384 Kabelkupplung weiblich 3 polig TH384 Kabelkupplung weiblich 3 polig
    Cable socket connector, female contacts
    Buchse
    3
    THF.384.R1A Cable socket connector, female contacts 3 Buchse 0
    TH384 Kabelkupplung weiblich 2 polig TH384 Kabelkupplung weiblich 2 polig
    Cable socket connector, female contacts
    Buchse
    2
    THF.384.R2A Cable socket connector, female contacts 2 Buchse 0

    Description

    The TH384 series joins two leads to each other — both halves sit on the cable, there is no panel mounting. This version terminates with crimp contacts, ordered separately and applied with the matching tool. The series is rated 10 A at 500 V AC.

    Reversed contacts

    This version is the mirror image: the pin contacts sit in the cable plug (Ø 27 × 63 mm), the socket contacts in the cable socket (Ø 26.5 × 55 mm). Which side stays live in operation decides the choice — the touchable pins belong on the side that is dead once disconnected.

    Pole counts

    In this arrangement, crimp termination is available in 2 and 3-pole versions. Cable diameter runs from 7 to 12 mm.

    Protection and materials

    Protection rating is IP66 and IP68, impact resistance IK07. The housing is glass-fibre reinforced plastic, the contacts brass.

    We supply the matching crimp contacts and tooling. Get in touch.